电磁吸盘维护保养和安全须知吸盘不得严重磕碰,以免破坏精度,在闲置时,应擦净,涂防锈油。  

吸盘外壳应接地,以免漏电伤人  

使用说明矩形电磁吸盘两侧有吊装螺孔,在安装时拧入T形螺钉即可吊装,用T形块和螺钉固定在工作台上,接通机床上的直流电源和地线,然后将吸盘上平面精磨一次,以保证上平面对底面的平行度。  

在吸附工件时,只要搭接相邻的两个磁极,即可获得足够的定位吸力,即可进行磨削加工。  

通过机床按钮,可实现工件的通磁和退磁。

Maintenance and safety of sucker without serious bump, so as not to damage the accuracy in the idle time, should be clean, antirust oil.

Sucker shell should be grounded, to avoid wounding leakage

The use of rectangular electromagnetic sucker on both sides of a lifting screw, when installing the T screw can be screwed into the lifting T shape is fixed on the working table block and screw, DC power supply and switch on the machine on the ground, and then the sucker flat grinding time, to ensure the plane on the bottom surface of flat line.

When the workpiece is absorbed, as long as the two adjacent magnetic poles are overlapped, enough positioning suction can be obtained, and the grinding process can be carried out.

Through the machine button, the workpiece can be achieved through magnetization and demagnetization.

欢迎联系我们:

联系人:  宋经理  

联系方式:  13939001428

微信: 13939001428

QQ:  695815698

邮箱:  695815698@qq.com

公司网址:  www.diancipan.com

公司地址:无锡市新吴区金城东路299号五洲国际工业博览城

如何保养磨床用电磁吸盘?-电磁吸盘
磨床电磁吸盘
如何保养磨床用电磁吸盘?-电磁吸盘
矩形密级电磁吸盘
如何保养磨床用电磁吸盘?-电磁吸盘
CNC强力磁盘